Projecting Extruded Pattern On To Curved Surface Autodesk Community As far as i'm aware, this projected curve onto a non planar surface cannot be extruded using the extrude command within the model workspace. i have found that you are able to extrude the projected curve in the patch workspace. Have you tried using project to surface? this is done by having your pattern you want offset from the face you want to project onto and then creating a 3d sketch and using project to surface command.
Projecting Extruded Pattern On To Curved Surface Autodesk Community In this case, i tried to project a hexagon and extrude it on the curved surface of the cylinder. after than i could just use a circular pattern and make the cylinder lighter in weight. Create the 2d sketch on a plane and extrude it through the body. use the sculpt command using the offset surface to create the desired curvature on the extrusion. The way to do this would be to extrude normally and then apply the draft tool, or offset a workplane to the surface's tangent and then extrude with the draft in it; and delete heal faces to clean up leftover geometry. If your surface is not too curved, you can get away with using project curve to surface to map the curves from a planar sketch onto the curved surface. then you can use split face to split the face along those curves, and use press pull to create a pseudo emboss on the curved surface.
Solved Projecting Sketches Onto Curved Surface Autodesk Community The way to do this would be to extrude normally and then apply the draft tool, or offset a workplane to the surface's tangent and then extrude with the draft in it; and delete heal faces to clean up leftover geometry. If your surface is not too curved, you can get away with using project curve to surface to map the curves from a planar sketch onto the curved surface. then you can use split face to split the face along those curves, and use press pull to create a pseudo emboss on the curved surface. Solution: use the emboss deboss feature: how to emboss deboss on curved surface in fusion. To get a 3d curve of a text projected on a curved surface follow these steps: create a sketch with a text. click 3d model > modify > copy object. click 3d model > modify > thicken offset. click "surface mode on". select the curved surface. enter distance 0 > ok. click 3d model > create > emboss. select the text. select "wrap to face" option. How do i cast (project) a point on a sketch onto this face, then create a tangent plane at this point, so that i can extrude a profile perpendicular to the curved face at this point? for example, imagine a cube with a hemisphere subtracted from the top side, creating a hollowed out bowl. I've created a body with a curved surface and projected several slots onto it that i would like to extrude but am unable to perform the extrude function. i had working files from previous projects that i could have referred to but my laptop was stolen.
Projecting Onto A Curved Surface Autodesk Community Solution: use the emboss deboss feature: how to emboss deboss on curved surface in fusion. To get a 3d curve of a text projected on a curved surface follow these steps: create a sketch with a text. click 3d model > modify > copy object. click 3d model > modify > thicken offset. click "surface mode on". select the curved surface. enter distance 0 > ok. click 3d model > create > emboss. select the text. select "wrap to face" option. How do i cast (project) a point on a sketch onto this face, then create a tangent plane at this point, so that i can extrude a profile perpendicular to the curved face at this point? for example, imagine a cube with a hemisphere subtracted from the top side, creating a hollowed out bowl. I've created a body with a curved surface and projected several slots onto it that i would like to extrude but am unable to perform the extrude function. i had working files from previous projects that i could have referred to but my laptop was stolen.
Solved Projecting To A Curved Surface Again Autodesk Community How do i cast (project) a point on a sketch onto this face, then create a tangent plane at this point, so that i can extrude a profile perpendicular to the curved face at this point? for example, imagine a cube with a hemisphere subtracted from the top side, creating a hollowed out bowl. I've created a body with a curved surface and projected several slots onto it that i would like to extrude but am unable to perform the extrude function. i had working files from previous projects that i could have referred to but my laptop was stolen.
Solved Projecting To A Curved Surface Again Autodesk Community