Vmix Audio Output Settings Lindabarn Many sound cards provide 3 or more stereo outputs from a single device. these are typically used to output surround sound, but can be used to output up to three independent stereo audio mixes in vmix. 1 2 the most common setting for standard stereo audio outputs. Many sound cards provide 3 or more stereo outputs from a single device. these are typically used to output surround sound, but can be used to output up to three independent stereo audio mixes in vmix. 1 2 the most common setting for standard stereo audio outputs. 3 4 this will send a stereo mix out over the output usually used for center.
Vmix Audio Output Settings Lindabarn 2. external audio mixer main mix output connected to vmix. this is the final audio mix that should include all audio needed for the recording and stream. this connection from the mixer to vmix can be made using a usb audio interface or the built in usb capabilities of some audio mixers (recommended) or using the line in microphone input on. Audio outputs allows up to four independently controllable audio outputs to be configured. if both master output and headphones are set to the same device, headphones will take priority. master output. select the output to send the master audio mix to. this is the default audio mix. used for streaming, recording and external output. headphones. Specify the master bit rate to use for all audio mixes including the vmix audio device. either 16bit or 32bit are supported. note: 32bit is not supported by most recording formats. recording audio. select the audio source to use in recordings, external output and streaming. this should be vmix audio by default. see recording audio for more. Many sound cards provide 3 or more stereo outputs from a single device. these are typically used to output surround sound, but can be used to output up to three independent stereo audio mixes in vmix. 1 2 the most common setting for standard stereo audio outputs.
Vmix Audio Output Settings Lindabarn Specify the master bit rate to use for all audio mixes including the vmix audio device. either 16bit or 32bit are supported. note: 32bit is not supported by most recording formats. recording audio. select the audio source to use in recordings, external output and streaming. this should be vmix audio by default. see recording audio for more. Many sound cards provide 3 or more stereo outputs from a single device. these are typically used to output surround sound, but can be used to output up to three independent stereo audio mixes in vmix. 1 2 the most common setting for standard stereo audio outputs. Audio outputs. this option can be enabled to convert all enabled audio buses under the audio outputs tab into live audio only ndi outputs. see the ndi section for more information. overlays. if the source option set to "output" the overlay check boxes can be used to customise which overlays are displayed on that particular output. Audio outputs allows up to four independently controllable audio outputs to be configured. if both master output and headphones are set to the same device, headphones will take priority. master output. select the output to send the master audio mix to. this is the default audio mix. used for streaming, recording and external output. headphones. Set an audio delay value in milliseconds to apply to all inputs added to vmix by default. this can be useful to offset an audio delay of an audio mixer. see recording audio .
Vmix Audio Output Settings Rightkum Audio outputs. this option can be enabled to convert all enabled audio buses under the audio outputs tab into live audio only ndi outputs. see the ndi section for more information. overlays. if the source option set to "output" the overlay check boxes can be used to customise which overlays are displayed on that particular output. Audio outputs allows up to four independently controllable audio outputs to be configured. if both master output and headphones are set to the same device, headphones will take priority. master output. select the output to send the master audio mix to. this is the default audio mix. used for streaming, recording and external output. headphones. Set an audio delay value in milliseconds to apply to all inputs added to vmix by default. this can be useful to offset an audio delay of an audio mixer. see recording audio .
Vmix Audio Output Settings Vicacolorado Set an audio delay value in milliseconds to apply to all inputs added to vmix by default. this can be useful to offset an audio delay of an audio mixer. see recording audio .